13-inch M2 MacBook Pro teardown confirms Apple’s lazy and ‘baffling’ design

If the comprehensive testing and your have eyes weren’t plenty of evidence, we now have definitive proof that the 13-inch MacBook Pro M2 is almost nothing far more than a recycled M1.

IFixit has carried out its customary tear down of the new device and verified what everyone envisioned: the new MacBook Pro is just a 2020 MacBook Professional with a new logic board. The new machines are so very similar, in reality, Apple is reusing the similar A2338 product quantity on each devices. The screws, the removing procedure, even the placement of the chips and cables are the very same, nevertheless iFixit notes that “some of the chips and more compact components have changed.”

Amid the smaller sized variations iFixit found is the warmth sink on the M1 has slightly rounded corners as as opposed to the squared off corners on the M2. iFixit also confirmed the slower SSD due to the use of a single 256GB chip on the M2 product compared to two 128GB chips. 

On the other hand, if you are hoping to invest in an M2 logic board and only swap out the M1, you can not. Significantly like Luke Miani discovered, iFixit discovered you can not simply just swap out the logic boards. Although they were being equipped to get the notebook to boot, key components wouldn’t do the job owing to the “baffling” choice to make the trackpad and keyboard incompatible with the older chip. iFixit notes that the components are identical, so the situation is most likely because of to software package limitations.

For that reason, iFixit feels the M2 MacBook Professional is a “missed opportunity” for Apple to introduce its 1st upgradable laptop in a long time and “set the tone for repairability and eco-helpful design and style,” specifically because Apple is launching a new MacBook Air with an M2 chip this thirty day period with a new design and style and specs.